- High-strength, long-lasting steel body
- Extra reinforced planetary gear system by heat treatment made ofspecial steel
- Lightweight and strong design
- Hydraulic disc brake system holding 100% load
- Front pulley and spring rope tensioner offered as standard
- Manual clutch as standard
- High torque hydromotor
- Corrosion and rust resistant electrostatic powder paint
- CE Machinery Directive 2006/42/EC
- Relevant standards EN 14492-1 : 2006 Standard for power-drivencranes
| Max. Pulling Force
kg/lbs |
4.600 kg (10141 lbs) |
| Max. Rope Diameter
(mm/ n) |
10 mm (3/8") |
| Max.Rope Length
(m-ft) |
41 m (134 ft) |
| Hydromotor(cc/in³) | 250 cc (15 in³) |
| Max. Pump Flow
(lt/min-g/min) |
60 L (15.8 gal) |
| Gear Ratio |
5 : 1
|
|
Max. Working Pressure
(bar/psi)
|
160 bar (2320 psi) |
| Recommended Gear Oil | 80 w 90 - 0.75 L |
| Product Weight | 60 kg (132 lbs) |
| Rope Winding Number | Pulling Capacity (kg/lbs) | Rope Winding Speed
(mt-min/ft-min) |
Rope Length
(m/ft) |
| 1 |
4600/10141
|
14.5/47 |
6,85/22
|
| 2 |
33880/8553
|
16/52 | 14,4/47 |
| 3 |
3350/7385
|
17.6/57 | 22,6/74 |
| 4 |
2940/6481
|
17.6/57 | 31,5/103 |
| 5 |
2621/5778
|
20.7/67 | 41/134 |
- Warning !!!
- The A-B lines must be open to the T-Tank line before the winch can be started.
- Hydromotor Drain line must be open
- The last 5 turns of rope should always be left on the winch
- This winch is designed and manufactured for towing purposes, do not use for lifting people ormaterials!
- Kms Winch reserves the right to make changes in technical details.
Benzer Ürünler
KMW 6.200 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :6.200 kg (13668 lbs)Max. Rope Diameter (mm/ n) :12 mm (1/2")
Max. Rope Length (m-ft) :53 m (173 ft)
KMW 8.200 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :8.200 kg (18077 lbs)Max. Rope Diameter (mm/ n) :14 mm (3/9")
Max. Rope Length (m-ft) :37.7 m (123 ft)
KMW 10.000 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :10.000 kg (22046 lbs)Max. Rope Diameter (mm/ n) :16 mm (7/11")
Max. Rope Length (m-ft) :46 m (150 ft)
