- High-strength, long-lasting steel body
- Three-stage planetary gear system made of special steel, extra-strengthened by heat treatment
- Light and strong design
- Hydraulic disc brake system holding 100% load
- Rope presser (rope tensioner)
- Manual rope unloading system as standard
- High torque hydromotor
- CE Machinery Directive 2006/42/EC
- Relevant standards EN 14492-1 : 2006 Standard for power-drivencranes
|
Max. Pulling Force
kg/lbs
|
35.000 kg (77161 lbs) |
| Max. Rope Diameter
(mm/ n) |
28 mm ( 10.9" ) |
|
Max. Rope Length
(m-ft)
|
70 m (229 ft) |
| Hydromotor(cc/in³) | 200 cc (12 in³) |
| Max. Pump Flow
(lt/min-g/min) |
75 L (19.8 gal) |
| Gear Ratio | 150 : 1 |
|
Max. Working Pressure
(bar/psi)
|
172 bar (2494 psi) |
| Recommended Gear Oil | 140 w - 4 L |
| Product Weight | 520 kg ( 1146 lbs) |
| Rope Winding Number | Pulling Capacity (kg/lbs) | Rope Winding Speed
(mt-min/ft-min) |
Rope Length
(m/ft) |
| 1 | 35000/77161 | 2.6/8.5 | 15.4/50.5 |
| 2 | 30272/66738 | 2.85/9.3 | 32.1/105 |
| 3 | 26665/58786 | 3/9.8 | 50./164 |
| 4 | 23826/52527 | 3.3/10.8 | 70/229 |
- Warning !!!
- The A-B lines must be open to the T-Tank line before the winch can be started.
- Hydromotor Drain line must be open
- The last 5 turns of rope should always be left on the winch.
- This winch is designed and manufactured for towing purposes, do not use for lifting people ormaterials!
- Kms Winch reserves the right to make changes in technical details.
Benzer Ürünler
KMW 10.000 PW-LONG HYDRAULIC WINCH
Max Pulling Force kg/lbs :10.000 kg (22046 lbs)Max. Rope Diameter (mm/ n) :16 mm (7/11")
Max. Rope Length (m-ft) :60 m (196 ft)
KMW 6.200 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :6.200 kg (13668 lbs)Max. Rope Diameter (mm/ n) :12 mm (1/2")
Max. Rope Length (m-ft) :53 m (173 ft)
KMW 15.000 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :15.000 kg (33069 lbs)Max. Rope Diameter (mm/ n) :18 mm (8/11")
Max. Rope Length (m-ft) :48 m (158 ft)
