- High-strength, long-lasting steel body
- Three-stage planetary gear system made of special steel, extra-strengthened by heat treatment
- Light and strong design
- Hydraulic disc brake system holding 100% load
- Rope presser (rope tensioner)
- Manual rope unloading system as standard
- High torque hydromotor
- CE Machinery Directive 2006/42/EC
- Relevant standards EN 14492-1 : 2006 Standard for power-drivencranes
|
Max. Pulling Force
kg/lbs
|
30.000 kg (66138 lbs) |
| Max. Rope Diameter
(mm/ n) |
26 mm ( 1" ) |
|
Max. Rope Length
(m-ft)
|
74 m (242 ft) |
| Hydromotor(cc/in³) | 160 cc (19.6 in³) |
| Max. Pump Flow
(lt/min-g/min) |
75 L (19.8 gal) |
| Gear Ratio | 150 : 1 |
|
Max. Working Pressure
(bar/psi)
|
180 bar (2610 psi) |
| Recommended Gear Oil | 140 w - 4 L |
| Product Weight | 500 kg ( 1102 lbs) |
| Rope Winding Number | Pulling Capacity (kg/lbs) | Rope Winding Speed
(mt-min/ft-min) |
Rope Length
(m/ft) |
| 1 | 30000/66138 | 3.3/10.8 | 16.5/54 |
| 2 | 26250/57871 | 3.5/11.5 | 34.4/112 |
| 3 | 23281/51325 | 3.8/12.5 | 53.5/175 |
| 4 | 20917/46114 | 4/13 | 74/242 |
- Warning !!!
- The A-B lines must be open to the T-Tank line before the winch can be started.
- Hydromotor Drain line must be open
- The last 5 turns of rope should always be left on the winch.
- This winch is designed and manufactured for towing purposes, do not use for lifting people ormaterials!
- Kms Winch reserves the right to make changes in technical details.
Benzer Ürünler
KMW 3.600 PW HYDRAULIC WINCH
Max. Pulling Force kg/lbs :3.600 kg (7936 lbs)Max.Rope Diameter (mm/in) :10 mm (3/8")
Max.Rope Length (m-ft) :41 m (134 ft)
KMW 18.000 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :18.000 kg (39683 lbs)Max. Rope Diameter (mm/ n) :18 mm (8/11")
Max. Rope Length (m-ft) :48 m (158 ft)
KMW 7.200 PW HYDRAULIC WINCH
Max Pulling Force kg/lbs :7.200 kg (15873 lbs)Max. Rope Diameter (mm/ n) :14 mm (3/9")
Max. Rope Length (m-ft) :37.7 m (123 ft)
